|
|
Patny Angular Ladder Type Cable Trays (ALTCT)
PATNY Angular Ladder Type Cable Trays (ALTCT) are
fabricated to M. S. Angles Conforming to I.S. 2062; 1992.
M. S. Angles are used as Runners and M. S. Flats as Rungs. Rung spacing is 250mm for 2500mm length and 300mm for 3000mmlength of Cable Trays. Rungs can be provided Single/Double, as per the Customer's choice.
| Tray width (W) |
Runner
Angle |
Rung (Flat) |
Rungs Spacing |
Tray Length
(L) |
Finish |
150 mm
or
1000 mm |
25x25x6 mm
40x40x6 mm
50x50x6 mm
65x65x6 mm
75x75x6 mm |
25x3 mm
25x6 mm
32x6 mm
50x6 mm |
250 mm
or
300 mm
Interval Double &
Single Rungs
|
2500 mm
or
3000 mm
|
Hot Dip Galvanized
Powder Coated
Enamet Painted |
Note: If other than the above-mentioned widths are required the trays can be fabricated as per the specifications by the customers / customers consultants.
Double Rungs |
Single Rungs |
Rung Runners |
90 Horizontal Elbow |
90 Vertical Inside Elbow |
90 Vertical Outside Elbow |
Left Hand Reducer |
| |
|
|
|
Right Hand Reducer |
Equal Reducer |
Horizontal Cross |
Horizontal Tee |
| Radius |
Types of Bends |
Degrees |
300/450/600/1000 mm
or
as per the choice of customers |
Horizontal, Vertical (Inside/Outside) Tees (Equal & Un-equal), Cross, Reducers |
30, 45, 60, 90 for Bends |
|
