PATNY Ladder Type Cable Trays (LTCT)
provides maximum ventilation and load carrying strength Used in applications with intermediate support with long spans, for Power & Control Cables.
LTCT's are fabricated out of
- Mild Steel Conforming to I.S. 1079; 1994 / I.S. 513; 1994
- Aluminium Conforming to I.S. 737; 1986 &
- Stainless Steel Conforming to grade 304 & 316
| Tray width (W) | Runner Height (H) | Runner Collar (C) | Rung Size | Rungs Interval | Rung Slot Size | Thickness (T) | Tray Length (L) | Finish |
|---|---|---|---|---|---|---|---|---|
| 150 mm to 1000 mm | 50 mm to 120 mm | 15 mm to 45 mm | 35×15 mm 40x20 mm 50x20 mm | 250 mm to300 mm | 20×10 mm Width Spacing 10 mm/15 mm gap | 1.6 mm to 3.0 mm | 2500 mm to 3000 mm | Hot Dip Galvanized Powder Coated |
Note: If other than the above-mentioned widths are required the trays can be fabricated as per the specifications by the customers / customers consultants.
Patny Ladder Type Cable Trays
Different Cross Sectional Details of Ladder Trays
Equal C Type Welded
New Bolted Type
Z Type
Ladder Type Cable Trays (LTCT) Accessories
90 Horizontal Elbow
90 Vertical Outside Elbow
90 Vertical Inside Elbow
Horizontal Cross
Left Hand Reducer
Right Hand Reducer
| Radius | Types of Bends | Degrees |
| 300/450/600/1000 mm or as per the choice of customers | Horizontal, Vertical (Inside/Outside) Tees (Equal & Un-equal), Cross, Reducers | 30, 45, 60, 90 for Bends |
